The One Security Lock For Van Mistake That Every Newbie Makes

Choosing the Right Security Lock For Your Van

Choosing the right security lock for your van can assist in stopping thieves and safeguard your cargo. Some locks are designed to be used for DIY installation, but others might require assistance from a professional to ensure they are properly installed and provide the best protection.

Slam locks are great for couriers doing multi-drop deliveries, as they lock automatically when you press the door shut. Deadlocks are used in conjunction with the lock you purchased from the manufacturer and provide an additional layer of protection.

Deadlocks

Van dead locks offer an additional physical security measure to stop criminals. These specialised aftermarket locks protrude into the van's door and connect to the frame, which means they can't be opened unless keys are used. They are particularly effective in protecting vans that have been parked for a long period of time or have expensive equipment.

They are ideal for those who utilize the remote locking systems of the factory during the day but would like to add an additional layer of security at night or when their vehicle is in an area they believe is vulnerable. They function by putting the bolt into a receiver that's fitted into the opposing body section of the van. They are operated by the supplied key and provide an additional layer of security over and above that offered by the manufacturer's locks.

In contrast to Slam locks and Hook Locks (both also available from our online store) which can be locked automatically when the door is shut These locks require the driver to operate using the key supplied. Straight bar locks are suitable for rear doors as well as a twin sliding door, while a hook lock can be used on front or rear doors in small to medium vans.

Both are designed to prevent a thief attacking the lock and forcing open, which could otherwise allow them access to the van's cab or load area. The locks are made specifically for each van model and positioned to offer additional protection against specific attack methods.

The impact of theft can be devastating for van owners and their users, especially professionals like tradespeople and contractors who rely on their vehicles to transport essential equipment and tools that they can't afford to lose. In addition to the expense to replace items stolen, it could cause loss of income due to unplanned downtime and the hassle of finding alternative transport options. Fitting a high-quality van lock will help protect your assets and deter thieves while reducing the risk of losing them and could even reduce insurance cost.

Hook Locks

Hook locks are an effective way to deter theft in vans. It can be hung on the door of your vehicle. It works independently from the locks of the manufacturer and can only be operated with a key with full control by the driver. It comes with a hook-shaped bolt that can't be forced to open and is made of high-quality materials. It also has a high resistance against drilling and manipulation. Sold Secure is the UK's most reliable security product testing body. Many models have been developed to meet the specifications of police officers and are endorsed by Sold Secure.

Think about how much security your van needs prior to buying a security lock. If you are carrying expensive tools or delicate cargo then a more advanced lock like an slam or deadlock, will be better suited. On the other side, if you're carrying less valuable items or tools, a simple slam lock may suffice. Additionally you should verify the insurance policies of your service provider to ensure that additional locking mechanisms won't invalidate your insurance coverage.

When you are choosing a security lock system, you must also consider its weather resistance. The locks you choose should be able to withstand various weather conditions, because vans are constantly exposed to the elements. This will ensure that they don't lose their effectiveness and will be more nimble for thieves to manipulate. Additionally, you should be aware of software updates for electronic locking systems to prevent security weaknesses and improve their effectiveness.

It is also important to choose an option that is simple to install. Some locks are made for DIY installation, whereas others require expert installation services to ensure that they're fitted correctly and function as intended. Your level of skill, confidence level and the resources you have available will determine whether or not a professional is needed to install the product.

Catalytic Converter Locks

Catalytic converters can reduce harmful emissions from your car. But, this essential component is also a target for thieves because of the precious metals it contains. The black market value of these valuable materials has caused a rise in the theft of converters. There are preventive measures to combat this issue.

Many people think that a simple alarm system will suffice however, they are less effective than a device designed specifically to safeguard your converter. These devices are made to detect vibrations or heat, and then emit a loud noise to deter thieves. These devices are more like deterrents than protection systems and are typically more expensive than a standard locking system.

The Cat Clamp converter lock, with a patent-pending design, is an established and tested method to stop the theft of catalytic converts. The device is constructed of stainless steel cable which runs around the converter and the frame of the vehicle. The cable is twisted up to seven times, and is locked which makes it difficult for thieves remove the converter. The unit can be put in place in under 30 minutes and does not read more require drilling or welding. It is easy to install on a range of vehicles and is suitable for use on cars, trucks, SUVs, vans, and other vehicles equipped with catalytic converters.

Another option for securing your catalytic converter is to install a metal plate that completely covers the unit. It's not as simple as putting up a cage made of metal, but it does make the converter harder to take. These plates can cost between $150 and $270, depending on the manufacturer.

Keep in mind that no security device is perfect However, taking preventive measures will reduce the likelihood of theft. It is essential to make the effort to secure your van properly. This will keep you and your belongings safe and can save you money on replacing expensive parts. It is a good idea to have your catalytic convert engraved with your VIN, as it will allow you to identify it when it is reclaimed and sold.

Anti-Peel Kits

This product is designed to guard against the well-known "Peel and steal" technique. It is placed on the front of the side-loading door on a vehicle. This improves the resistance of your van's doors to 'peel and steal attacks by as much as 300 percent. Using the L4V Anti-Peel Kit in conjunction with a hook that is high-positioned lock greatly reduces the chance of thieves getting access to your van through the side door for loading.

With the latest and most brash methods of van theft and the rate of crime increasing, it is vital that additional security measures for vans are employed. The 'peel and steal' technique is the most recent in van theft. Thieves are able to steal tools and items by pressing the doors with their knees then bending, pulling and closing them. This type of crime is now a regular occurrence costing tradespersons throughout the UK thousands of pounds in lost stock and tools.

Locks 4 Vans has launched an innovative high hook lock and an anti peel kit that is designed to address this growing problem. The Anti-Peel Kit is fitted to the barn door of your Ford Custom reducing the chance of "peel and steal" attacks by reinforcing the door skin and adding an additional layer of security. The high-quality hook lock provides additional security to the door and keeps it secure in case the anti-peel plate is taken off.

On the internet, you can purchase our anti-peel kits and get it delivered to your vehicle within several days. Our engineers will install the items. Our installers are located in Greater Manchester and Tameside, so we can offer our services to areas like Manchester Salford, Ashton Under Lyne Oldham Rochdale.

Contact us if you would like to know more about increasing the security of your van. We provide a variety of options to enhance the security of your van. These include deadlocks, armour locks and shielding to prevent puncture attacks.

Leave a Reply

Your email address will not be published. Required fields are marked *